Glossary
/
Condition-based maintenance

What is condition-based maintenance?

Definition

Condition-based maintenance is a maintenance strategy where work is scheduled based on the actual condition of a machine, measured through condition monitoring, rather than on a calendar or after a breakdown. Maintenance happens when indicators such as vibration or temperature show that performance is degrading.

Updated
October 22, 2026
·

How condition-based maintenance works

Condition-based maintenance turns monitoring data into work orders:

  1. Set baselines for each asset's normal condition.
  2. Monitor with vibration, temperature, oil or other methods, using a condition-based monitoring system.
  3. Trigger a maintenance task when a defined change is detected.
  4. Plan the work around production, with parts and people ready.
  5. Review the finding after repair to improve future triggers.

Condition-based maintenance vs. preventive maintenance

Preventive maintenanceCondition-based maintenance
TriggerCalendar or run hoursMeasured machine condition
Risk of unneeded workHighLow
Risk of missed faultsFaults between intervals go unseenLower, if coverage is right
Data neededLittleCondition monitoring data
Best forSimple, low-cost assets with known wear patternsCritical rotating equipment

Predictive maintenance goes one step further and uses trends or AI to forecast when a failure will happen.

Advantages of condition-based maintenance

  • Maintenance only when it's needed
  • Fewer unplanned stops
  • Better use of technicians' time
  • Lower spare-parts inventory
  • Longer asset life

Challenges, and how to solve them

ChallengeHow to solve it
Upfront cost of sensorsStart with critical assets; use existing sensors and handheld routes where possible
Too many false alarmsUse behavior-based analytics instead of fixed thresholds
Not enough analysts to review dataLet software prioritize machines so analysts focus on real issues
Data spread across systemsOne platform for all sensor brands and data types

How to implement condition-based maintenance

  1. Rank assets by criticality: cost of failure, safety risk, production impact.
  2. Map failure modes for the top assets and the signal that reveals each one.
  3. Choose monitoring coverage: route, wireless or continuous.
  4. Define triggers and who acts on them.
  5. Connect to your CMMS so findings become work orders.
  6. Pilot, measure, scale: track avoided stops and maintenance hours saved.
Ready to run CBM at scale? MultiViz prioritizes your machines and cuts false alarms. See condition monitoring software

Condition-based maintenance examples

  • A bearing's envelope spectrum shows rising fault frequencies → replacement planned for the next shutdown.
  • A fan's vibration rises after a rebuild → balancing scheduled before damage spreads.
  • Oil analysis shows wear particles in a gearbox → inspection booked at the next stop.

How to measure CBM success

Track unplanned downtime, maintenance cost per asset, share of planned vs. unplanned work, MTBF and MTTR.

Frequently asked questions

Is condition-based maintenance the same as predictive maintenance?

No. Condition-based maintenance acts on the current condition; predictive maintenance forecasts future failure. Many programs use both.

What equipment suits condition-based maintenance?

Critical rotating equipment: motors, pumps, fans, gearboxes, compressors.

Is CBM worth it for small plants?

Yes, if you start with the few machines whose failure stops production. Wireless sensors and existing handheld routes keep the cost down.

← Back to the glossary A–Z

See what your team could stop checking

MultiViz works with the sensors you already have and flags only the machines that need attention.

Book a 15-minute demo