Glossary
/
Condition monitoring

What is condition monitoring?

Definition

Condition monitoring is the practice of measuring a machine's health while it runs, using data such as vibration, temperature, oil quality and sound, to detect developing faults before they cause a failure. It lets maintenance teams fix machines when the data shows a need, instead of on a fixed schedule or after a breakdown.

Updated
October 22, 2026
·

How condition monitoring works

  1. Measure: sensors or handheld instruments collect data from the machine.
  2. Compare: the data is compared with the machine's normal behavior or with standards such as ISO 10816/20816.
  3. Detect: changes that point to a developing fault are flagged.
  4. Diagnose: an analyst or software identifies the likely fault, such as bearing wear, imbalance or misalignment.
  5. Act: maintenance is planned before the fault becomes a failure.

Types of condition monitoring

MethodWhat it measuresTypical faults found
Vibration analysisVibration amplitude and frequencyBearing faults, imbalance, misalignment, looseness
ThermographySurface temperatureElectrical hot spots, friction, cooling problems
Oil analysisWear particles and oil conditionGear and bearing wear, contamination
UltrasoundHigh-frequency soundEarly bearing wear, leaks, lubrication issues
Motor current analysisElectrical current signatureRotor bar faults, electrical imbalance
Visual and acoustic inspectionWhat a technician sees and hearsLeaks, loose parts, obvious damage

Vibration analysis is the most widely used method for rotating equipment because most mechanical faults change how a machine vibrates. Learn more in What is vibration analysis. [link once live]

Condition monitoring methods: periodic vs. continuous

  • Periodic (route-based): a technician walks a route with a handheld instrument, typically monthly. Low cost, but faults can develop between visits.
  • Continuous (online): sensors mounted on the machine send data around the clock. Catches fast-developing faults and suits critical or hard-to-reach assets.
  • Wireless: battery-powered sensors that report several times a day. A middle ground that makes it affordable to monitor balance-of-plant equipment.

Most plants combine all three. The challenge is then bringing the data together in one place.

What is a condition monitoring system?

A condition monitoring system is the full setup: sensors, data collection, and the software that analyzes the data and alerts your team. The software layer decides how useful the system is. Threshold-based software generates many false alarms; behavior-based software learns what normal looks like for each machine. More: condition-based monitoring systems.

Looking for condition monitoring software? See how MultiViz works with your existing sensors

Condition monitoring vs. predictive and preventive maintenance

ApproachWhen work happensBased on
Reactive maintenanceAfter a failureBreakdown
Preventive maintenanceOn a fixed scheduleCalendar or run hours
Condition-based maintenanceWhen condition data shows a needCondition monitoring
Predictive maintenanceBefore a predicted failureCondition monitoring plus trend analysis or AI

Condition monitoring is the data source; condition-based and predictive maintenance are the strategies built on it. See condition-based maintenance.

Benefits of condition monitoring

  • Fewer unplanned stops and lower repair costs
  • Maintenance only where it's needed, so less wasted work
  • Smaller spare-parts inventory
  • Longer asset life and safer operation

How to start a condition monitoring program

  1. List critical assets and their failure history.
  2. Choose methods per asset (vibration for most rotating equipment).
  3. Decide route, wireless or continuous coverage per asset class.
  4. Pick software that works with all your sensors.
  5. Start with a pilot, measure avoided failures, then scale.

Frequently asked questions

What is the difference between condition monitoring and condition-based monitoring?

They mean almost the same thing. “Condition-based monitoring” is often used when the monitoring drives maintenance decisions. See what is condition-based monitoring, or what goes into a condition-based monitoring system.

Which machines should be condition monitored?

Start with critical rotating equipment such as pumps, fans, motors, gearboxes and compressors, where a failure stops production or creates a safety risk.

Can condition monitoring be done remotely?

Yes. Wireless and online sensors send data to software that can be reviewed from anywhere.

← Back to the glossary A–Z

See what your team could stop checking

MultiViz works with the sensors you already have and flags only the machines that need attention.

Book a 15-minute demo