The 1× component is the vibration that occurs once per revolution of the shaft. A peak is called dominant when it stands clearly above its harmonics (2×, 3×, …) at running speed.
Characteristics
One clean peak. Energy is concentrated at running speed rather than spread across a family of harmonics.
A force that rotates with the shaft. Any once-per-turn unbalanced force on the rotor shows up here.
Direction matters. Comparing radial vs. axial 1× helps narrow down the cause.
Possible faults
A dominant 1× means a once-per-revolution force is driving the machine. The most common causes:
Unbalance. The textbook cause — a strong, stable 1×, mostly radial, that rises with speed.
Eccentricity. A rotor or pulley running off-centre produces a steady 1×.
Bent shaft. A 1×, often with raised axial vibration, from the shaft not running true.
Structural / soft-foot looseness. A weak base lets the 1× force move the machine.
Resonance. A natural frequency sitting near running speed amplifies the 1×.
How MultiViz detects it
MultiViz locates the running-speed peak and compares its amplitude to the surrounding harmonics.
When 1× clearly dominates the rest of the spectrum, it flags Dominant 1×.
It reports the estimated RPM and tracks the 1× level over time, so it’s possible to see at a glance whether an unbalance is developing or stable.